How to create custom magnets
Square, circle, or with a transparent background – the shape of the magnet doesn’t matter. Die-cut magnets should have a transparent background, square magnets should have a square background.
The die cut processes carefully cut the shape of the magnet without harming the rest of the magnet sheet. This means that corners and outcroppings aren’t bent or damaged during the transportation process.
See the following list for specifications on the buffer area. This will be automatically applied after upload, so there’s no need to worry about it during the design process.
- For a 3×3 magnet – Kiss cut will be 30 px away from the edge of the image
- For a 4×4 magnet – Kiss cut will be 40 px away from the edge of the image
- For a 6×6 magnet – Kiss cut will be 50 px away from the edge of the image
Warning. If your design features a lot of tiny details that are far apart from each other, these will be cut out as separate objects which can cause difficulties when gluing onto a surface. Keep all the elements in the safe zone.
You can also create a square magnet, all depends on the file format you are using for – transparent backgrounds for a design if you want a kiss cut magnet. Square design for square magnets.
Make your own custom magnets today!
Fantastic job learning about custom magnets. Level up to the next section about stickers!